Trench Clearing Bucket with Tilt Motor (12 to 40 t)

Application

This type of bucket is the German market leader among tilt motor buckets. As a high-performance bucket, it enables unrestricted and maintenance-free work on both sides up to a 45° tilt position.

The harsh conditions of the construction sector have proven to be detrimental to the trench clearing buckets that were found in the market. Damaged cylinders, worn tilt heads and bushings, jammed bolts due to lack of lubrication and, finally, downtime due to damaged or torn off hydraulic hoses try the nerves of the machine operator and cost money.

Trench Clearing Bucket with Tilt Motor (12 to 40 t) (3D image)

Features

  • Robust and compact tilt motor replaces traditional tilt head
  • Hydraulic hoses are directly fed to the tilt motor to rule out damage
  • The motor is fully maintenance-free as a result of lubrication over the hydraulic oil of the grapple slewing gear
  • Bolts, cylinder and cylinder covering not needed
  • Screw-retained suspension for changing for various carrier machines
  • Highest possible rotation and rotation torque
  • Integrated pressure relief valve prevents overload of the tilt motor
  • With drainage slots
  • Protruding base to the side from Class I in HB 400
  • Only provider with cast housing
  • Tilting range of 2 x 45° limited by a stop

Extra equipment

  • Special seal to protect the standard seal of the motor for use underwater or in fine-sand ground available on request for the tilt motor classes II S and III L

  • Trench Clearing Bucket with Tilt Motor (12 to 40 t) on excavator
  • Trench Clearing Bucket with Tilt Motor (12 to 40 t) in use

Technical Details

Class I (Carrier machines 12 - 15 t)

Cutting width in mm Capacity SAE/L Weight (approx. kg)
1800 440 626
2000 495 658
2200 550 690
2400 605 722

Class I/II (Carrier machines 15 - 19 t)

Cutting width in mm Capacity SAE/L Weight (approx. kg)
1800 600 833
2000 650 868
2200 700 903
2400 750 938

Class II S (Carrier machines 19 - 23 t)

Cutting width in mm Capacity SAE/L Weight (approx. kg)
1800 800 961
2000 900 1002
2200 1000 1043
2400 1100 1084

Class III L (Carrier machines 23 - 26 t)

Cutting width in mm Capacity SAE/L Weight (approx. kg)
2000 1000 1263
2200 1125 1315
2400 1250 1366
2600 1375 1418

Class III (Carrier machines 23 - 29 t)

Cutting width in mm Capacity SAE/L Weight (approx. kg)
2000 1100 1515
2200 1260 1572
2400 1430 1632
2600 1600 1691

Class IV (Carrier machines 29 - 40 t)

Cutting width in mm Capacity SAE/L Weight (approx. kg)
2000 1330 2090
2200 1515 2160
2400 1700 2245
2600 1885 2325
2800 2070 2395

Tilt motor Class V (Carrier machines 50 t) on request.

Corporate Video