Heavy Duty Bucket

Application

Like the individual, heavy Backhoe Bucket, the Rädlinger Heavy Duty Bucket is the perfect partner for mining and demolition. With its special reinforcement and optimised side cutting edges, it is suited for even the most demanding applications.

Heavy Duty Bucket (3D image)

Features

  • Customised production and fittings possible with different toothed systems and blades
  • Extremely robust construction design and low net weight through the use of highquality materials and high-strength steels
  • Blade and side cutting made of special steel
  • Protective siding and transverse wear strips in HB 400/500
  • Slightly protruding tooth holders at the corners and rear-narrowing bucket body for optimum free cutting of the bucket
  • Welded blade reinforcement in front and side cutting edge reinforcement below
  • Heavy-duty and deep side cutting for force transfer from the box to the blade

Extra equipment

  • Bucket body in HB 400
  • Load hook 5 t, 10 t, 18 t
  • Ball groove
  • Various reinforcement stages
  • Welded blade reinforcement in front and side cutting edge reinforcement below
  • Intermediate sizes and special designs available on request

Technical Details

Class III/IV (approx. 30 - 40 t)

Cutting width in mm Capacity SAE/L Number of teeth
800 1260 3
1000 1580 3
1200 1900 4
1400 2220 4
1600 2540 5
1800 2860 5

Class IV (approx. 40 - 50 t)

Cutting width in mm Capacity SAE/L Number of teeth
1000 1790 3
1200 2150 4
1400 2510 4
1600 2870 4
1800 3230 5
2000 3590 5

Class V (approx. 50 - 70 t)

Cutting width in mm Capacity SAE/L Number of teeth
1400 3190 4
1600 3640 4
1800 4100 4
2000 4550 5
2200 5000 5
2400 5460 6

Class VI (approx. 70 - 100 t)

Cutting width in mm Capacity SAE/L Number of teeth
1400 4010 3
1600 4590 4
1800 5170 4
2000 5730 4
2200 6300 5
2400 6870 5
2600 7450 5

Class VI s (approx. 101 - 130 t)

Cutting width and Capacity in coordination.

Corporate Video